Optional accessories for specbos and spectraval
Each front end accessory changes the sensitivity of the instrument, therefore an individual calibration file is necessary for each accessory. The specbos 1211 can store up to 12 calibration sets. The front ends can be coded that up to three calibration files will be selected automatically if the related accessory is attached (the fourth is the calibration of the instrument without accessory).
Spectraval 15x1 has an electronic sensor and can detect up to 8 accessories after calibration.
Special imaging optics
Special imaging optics for specbos 1211
|Specified measuring diameter 210 mm in a specified measuring distance 420 mm||ACC 009/1/210_420|
|Specified measuring diameter 20 mm in a specified measuring distance 2050 mm||ACC 009/1/20_2050|
|Specified measuring diameter 120 mm in a specified measuring distance 1300 mm||ACC 009/1/120_1300|
|Specified measuring diameter 10 mm in a specified measuring distance 700 mm||ACC 009/1/10_700|
|Specified measuring diameter 10 mm in a specified measuring distance 1020 mm||ACC 009/1/10_1020|
Special imaging optics for specbos 1211UV-2
|Specified measuring diameter 1.5 mm in a specified measuring distance 56 mm||ACC 009/1/1.5_56 UV|
Special imaging optics for spectraval 15x1
|Specified measuring diameter 4 mm in a specified measuring distance 90 mm||ACC 009/2/4_90|
|Specified measuring diameter 12 mm in a specified measuring distance 2100 mm||ACC 009/2/12_2100|
|10° optic||ACC 009/2/10°|
|25° optic||ACC 009/2/25°|
Beam shaping optics
It is not necessary to adjust the optics of specbos or spectraval in Radiance mode, the measuring spot is sharp at any distance and the viewing angle is always 1.8°. If a specific measuring spot diameter is required, this can be set by selecting the appropriate measuring distance. In some cases this is not possible due to space limitations, e.g. in production measurements or in special set ups. Therefore, different beam shaping optics are available.