Integrating spheres


Article number: OPS 300, OPS 500, OPS 500-H
Device: specbos 2501, specbos 1211-2

The functionality of JETI specbos 2501 and specbos 1211-2 can be extended to Radiant flux measurements when using it with an Integrating sphere. The device is detachably connected to the sphere, so it can be used also without or with other accessories.

Three different sphere models are available (diameter 300 mm, not hinged and diameter 500 mm, hinged or not hinged). The port and baffle design is compatible to LM-79 and similar standards, the sample ports are compatible to 1.5” LED holders. An auxiliary lamp is available. Another port and baffle design is possible on request.

Integrating sphere with 300 mm diameter (not hinged)
Integrating sphere with 300 mm diameter (not hinged)
Integrating sphere with 300 mm diameter (not hinged)
Integrating sphere with 300 mm diameter (not hinged)
Integrating sphere (hinged) with 500 mm diameter
Integrating sphere (hinged) with 500 mm diameter
Opened Integrating sphere with internal sample holder and two baffles
Opened Integrating sphere with internal sample holder and two baffles

Integrating spheres for spectroradiometer JETI specbos
Integrating sphere diameter Measuring geometry Measuring range (Luminous Flux) Features Part number
300 mm 2π 0.05 ... 12 000 lm not hinged,
no auxiliary lamp		  OPS 300
500 mm 4π 0.1 ... 30 000 lm not hinged,
auxiliary lamp possible		  OPS 500
500 mm 4π 0.1 ... 30 000 lm hinged,
with auxiliary lamp		  OPS 500-H
Integrating sphere diameter*:  300 mm Measuring geometry:
2π		 Measuring range (Luminous Flux):
0.05 ... 12 000 lm		 Features:
not hinged,
no auxiliary lamp		 Part number:
 OPS 300
Integrating sphere diameter*:  500 mm Measuring geometry:
4π		 Measuring range (Luminous Flux):
0.1 ... 30 000 lm		 Features:
not hinged,
auxiliary lamp possible		 Part number:
 OPS 500
Integrating sphere diameter*:  500 mm Measuring geometry:
4π		 Measuring range (Luminous Flux):
0.1 ... 30 000 lm		 Features:
hinged,
with auxiliary lamp		 Part number:
 OPS 500-H

* other diameters are possible on request